Quick Tips to Finding Hidden Piping and Valves
Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.
In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.
There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. If you find such a piping in your home then you are sure that you have a really high pressure gas system. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.
There is a high chance that water valves usually have two shut off valves since one is located before the meter and the other located after the meter. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.
Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.
Automatic valves for your sprinkler system may in most cases be located underground and are usually harder to find as you read more from this website. By using a metal detector, you are sure that you will be able to find such valves since they are usually made up of metals. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.
Supporting reference: check my blog