The Essentials of – Getting to Point A

Standard Colors for Your Underground Utilities

It is now easier to know what an underground utility line is for. The risk was high before when people could not easily identify the type of utility lines underneath whenever they dig. Today, the risks have been lessened although not completely eliminated. If there is a need to dig the ground, it is very important that the utility lines first be identified. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. It is to prevent disaster. Fatal injuries can happen if underground utility lines are struck. It can also interrupt services in your area where the line is located. To prevent these types of incidents, it is important for property owners to call 811 so utility companies can identify their undergoing lines. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

Marking lines may lessen the risks but there are time when accidents still happen. Utility lines are struck every 6 minutes, some place. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.

GPR or Ground Penetrating Radar is used by companies to locate their utility lines. With this machine, companies can easily locate utility lines. Companies can locate their utility lines if any property owner calls 811.

There are certain colors that mark different utility lines for easy identification. Below are some of the colors used for different utility lines.

White lines are for proposed excavation sites. Area that will be excavated in the future are marked.

Temporary survey markings use pink lines. Legal property boundaries are marked off by these pink lines.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. The color red is perfect for electric works because it is associated with fire and danger.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. If you see blue lines then these are lines for potable water. Reclaimed water, irrigation, and slurry lines used purple lines. If you see the color green, then it indicates sewer and drain lines. Hitting this line can truly derail any project for a long period of time.

You can learn more about the color coding of utility lines if you click here now! Click here for more.

Cited reference: Discover More

Related posts